Black Fine Ribbed Rubber Matting to IEC61111-2009 Class 2, 17,000v Working / 30,000V tested

• SM570-02 Fine Ribbed Black EPDM Rubber Matting to IEC61111-2009 Class 2, is a high-quality electrical safety matting fully tested to 30,000 volts with a regulation standard stamped on the reverse of a roll at 1000mm intervals.
• Maximum safety working voltage of 17,000v.
• It has a fine ribbed, anti-slip surface pattern on one side and a cloth impression finish on the reverse.

Class 2:

• Withstand Test: 30kv - No Electrical Puncture
• Puncture Proof Test:  20KV for 3 Minutes
• Working Voltage: - 17,000 volts
• Thickness: 4mm

Key Points

• Health & Safety regulation material
• Fully traceable supply
• Regulatory branding on reverse
• Low maintenance
• Available 0.91m, 1.0m and 1.2m wide rolls
• THIS GRADE DOES NOT CONTAIN RECYCLED RUBBER
• This Product is REACH, RoHS, PAH and CE Compliant
• Due to the very high quality of METROSEAL raw materials, the need for additional thickness is not necessary.
• The IEC:61111 specification only states ‘maximum’ thickness with the minimum thickness being determined by suppliers ability to pass the correct tests defined in Clause 5 of specification.
• The above materials do so with the ‘integral’ lay-flat quality of the rubber compounds use not impaired in any way.
• In addition to the above, our thinner grades present less of a trip hazard when laid offering additional safety to operators.
• Standard finishes of this type are FINE RIBBED [corrugated] one side with an anti-creep impression on reverse.

MARKINGS:

• The example marking on the underside of the mat will consist of a tag denoting details as right:
• The brand shall be placed at 1000mm intervals along the length of rolls.
• The brand shall be colour coded as per IEC:61111:2009 guidelines
• Class ‘O’ - RED, Class ‘1’ - WHITE, Class ‘2’ - YELLOW, Class ‘3’ - GREEN, Class ‘4’ - ORANGE
• Cut lengths available to order