- For best results follow the instructions below to ensure maximum performance in all environments.
- Ensure the material is kept in dry, warm conditions in the original protective packaging.
- A clean, dry, and smooth surface are essential. If you are applying to a Chequer Plate or other profiled or uneven surface, please use our SS#400 Conformable antislip tape.
- Use an IPA (Isopropyl Alcohol) cleaner to remove all surface contaminants (paint flakes, etc) – DO NOT use methylated spirits/petrol / lighter fluid, etc as these leave behind a thin, greasy residue.
- Ensure prepared surface is above 10°C.
- Apply a small amount of the IPA Cleaner to the surface using single sweeps.
- Do not re-wipe over the area that has been cleaned with the dirty cloth.
Porous Surface Sealing
- Porous surfaces must be sealed prior to application to prevent water from attacking the adhesive.
- We supply a specific Primer for this job which can be added to your shopping cart during checkout.
- Apply a thin coat to the thoroughly cleaned surface using a paintbrush, then leave to dry.
- In normal conditions, drying should take less than 30 minutes.
- Cut tape to the required dimensions.
- Peel back part of the release liner then press the adhesive firmly onto the prepared surface, and slowly keep peeling back the liner while applying the tape. Try to ensure that the tape is not taut.
- Our Conformable Anti Slip Tape is designed for Chequer Plate and other profiled or uneven surfaces and can be gently firmed into position using a rubber mallet to help the tape fit into the contours of the surface.
- Once applied, press tape down firmly using even pressure (decorating rollers are excellent for this).
- We recommend sealing the edges using ‘edge fix’ as this will extend the life of the product.
- Only apply a very small bead down the edges after the tape has been applied. If correctly applied, the new anti-slip surface can be walked on straight away, though you will get the maximum benefit from the adhesive system after 48 hours.
SS#600 Photoluminescent Glow In The Dark Anti Slip Tape:
- The surface of our Photoluminescent Glow In The Dark anti slip tape is charged by normal illumination e.g. daylight or fluorescent light and emit a glow as soon as the natural light source is interrupted i.e. power failure, smoke obstruction or similar, providing excellent stair safety in emergency situations.
- Ideal for use in areas with no, or very little light. Avoid tripping over your front step at night or reduce the risk of your clients having a slip and fall accident as they leave your bar or nightclub.
- Perfect for fitting in badly lit stairways and hallways.
- Stop Slip glow in dark antislip tape can be charged by natural or artificial lighting and provide a steady stream of light discharge.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.