Heavy Duty Two-Pack Epoxy Floor Paint For Garage & Workshops - 5kg

A premium two-pack, highly durable epoxy resin-based floor paint, based on a high build-solvent free epoxy resin, ideal for use in domestic and industrial areas such as warehouses, factories, garages and industrial units due to its high build, high durability formula.
HB Epoxy Garage Floor Paint is 100% solids, unlike other, cheaper water-based and solvent-based epoxies. This results in no coating thickness loss during curing helping provide a thicker, more durable coating.
HB Epoxy Garage Floor Paint can improve your factory floor in terms of both strength and appearance, providing a premium gloss finish and increasing overall durability in part due to the thickness of the product, which is up to 5x thicker than other paint systems on the market and overall mechanical strength as a result of the strength of the epoxy resin itself.
High durability against abrasion, scratches and impacts as well as mechanical wear such as forklifts, pallet track and other mechanical forces.
It provides a tough petrol and oil resistant finish with excellent durability while also providing great tyre pluck properties good for areas with forklifts and work vehicles.
Ideal for use in large factories, industrial units, garages and on workshop floors.
This item is always in stock for all order sizes, fast delivery on any amount, important if you have a large area to cover.
SUITABLE SUBSTRATES
Can be used on correctly prepared (see application tab above) concrete, metal and wood as well as most other porous substrates.
Power floated and polished floors must be ground using a floor grinder prior to application of this paint with the primer/sealer.
Not recommended for use on self-levelling floors as they tend to be non-porous.
SPREADING RATE (Coverage)
A 5kg tin will cover approximately 17-20+ square meters per coat. Coverage rates vary depending on surface area and porosity.
Coverage is based on an application thickness of 400-500 microns for 2 coats.
Please note the above coverage rates are per coat, we always advise 2 coats.
DRYING/CURE TIME
We recommend you allow a minimum of 24 hours at 20°C prior to allowing foot traffic and 48 hours at 20°C prior to allowing vehicular traffic on the coated area(s). 7 days of curing at 20°C are advised prior to exposure to chemicals.
The minimum application temperature for this product is 7°C, Both surface and ambient temperature
Under normal circumstances, this product will be:
Tack Free Time in approximately 8-12 hours (at 20°c)
Hard Dry Time in approximately 12-24 hours (at 20°c)
Full Chemical Resistance in approximately 7 days (at 20°c)
Temperatures below 20°C will slow curing times.
CHEMICAL RESISTANCE
This product exhibits excellent resistance to dilute acids, alkalis and oils. Suitable for most types of industrial spills.
STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent paint hardening.
Keep away from frost.