Industrial Quality Anti Corrosive Metal Oxide Primer Paint

Anti-Corrosive Oxide Primer Paint is as the name suggests a highly durable, oil-based primer that provides excellent anti-corrosive properties to prevent rust formation on steelwork and metal cladding.
Designed for use on Steel and wood to ensure maximum adhesion for the subsequent solvent-based topcoats.
Available in Grey, Red and Buff in a semi-shine finish.
This product is designed to be a tough and durable coating, it allows the surface to then be coated with one of the many - Solvent-Based Topcoats for a multitude of uses.
Can be easily applied by brush, roller or airless sprayer.
SURFACE PREPARATION
Ensure all surfaces are sound and clean, free from dust and flaking paint.
Ensure the surface is completely dry and free from condensation and dampness.
Remove any loose or flaking paint.
SUITABLE SUBSTRATES
Suitable for use on Steelwork and wood.
SPREADING RATE (Coverage)
Approximately 6 - 8 square metres per litre per coat.
This varies, apply in thin even coats to ensure maximum durability and lower drying times.
DRYING TIME
Touch Dry: 6-8 hours at 18°C
Overcoat able: 6-8 hours at 18°C
Fully Cured: 7 days at 18°C
STORAGE PRECAUTIONS
Store away from heat and flames. For long-term storage, keep away from frost. Secure the lid between uses to prevent paint hardening.
CLEANER / THINNERS
This product can be thinned with standard White spirits, thinning should only be done if the product is being sprayed and the sprayer is unable to spray the product un-thinned. Up to 15% white spirits can be added, try and add as little white spirits as possible until spraying is possible to ensure maximum quality.
Cleaning brushes and equipment should be done with White spirits
BATCH INFORMATION
We recommend ordering all the paint required in one order so you receive the same batch, ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat if being used as the top coat.