Industrial Quick Drying Solvent Free Concrete Dustproofer Clear Sealer

Paints - Concrete Dustproofer is a solvent-free, quick-drying concrete sealer with a low viscosity formula which provides a highly effective coating to prevent dust formation on new and existing concrete floors while providing low downtimes and low odor application.
Solvent FREE concrete dustproofer that helps prevent dusting on porous concrete surfaces. It's frequently used to seal and prevent dust on concrete on garage floors and industrial floors.
Easy to apply by a roller or sprayer, gives additional protection to concrete surfaces.
Ideal for use as an undercoat prior to application of Quick Drying Floor Paints on bare concrete floors in industrial, commercial and domestic areas due to its ability to penetrate deeper into the substrate providing a better surface to for the floor paint to adhere to and reducing the risk of delamination.
This product SHOULD BE USED as the primer and sealer for all our quick-drying floor paints for both internal and external applications.
USES AND SURFACE COMPATIBILITY:
Suitable for use as an undercoat for Floor paint on internal and external concrete floors and also a durable concrete sealer.
SPECIAL PROPERTIES:
It is easily cleaned and will withstand regular washing. Also resistant to most stains and oils.
SPREADING RATE:
First coat: Approximately 5 square meters per liter.
Second coat: Approximately 7 square meters per liter.
This is a rough estimate and varies depending on the condition of the driveway/floor and amount applied with each coat.
DRYING TIME:
Under normal conditions, Sealer is touch dry in approximately 2-4 hours.
Do not drive on the surface for 24 hours after the last coat.
APPLICATION:
Brush, Roller, or Sprayer.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Do not apply if there is any chance of rain.
Apply only one coat if being used as a primer prior to application of our floor paint, 2 if being used solely as a sealer/dustproofer.
STORAGE PRECAUTIONS:
Store away from heat and flames. Secure the lid between uses to prevent sealer hardening. Store away from frost.
THINNERS:
Thinners aren't required with this product, warm soapy water can be used for cleanup.
SURFACE PREPARATION:
Ensure all surfaces to be sealed are clean, dry and free from oil and grease.
If applying on exterior surfaces, please ensure no rain is forecast and the surface is dry before application.