Pack of 10 Anti-Slip Circles In Standard Grade - Fluorescent

• For best results follow the instructions below to ensure maximum performance in all environments.

Material Storage

• Ensure the material is kept in dry, warm conditions in the original protective packaging.
  

Surface Preparation

• A clean, dry, and smooth surface are essential.
• If you are applying to a Chequer Plate or other profiled or uneven surface, please use our SS#400 Conformable antislip tape.
• Use an IPA (Isopropyl Alcohol) cleaner to remove all surface contaminants (paint flakes, etc) – DO NOT use methylated spirits/petrol / lighter fluid, etc as these leave behind a thin, greasy residue.
• Ensure prepared surface is above 10°C.
• Apply a small amount of the IPA Cleaner to the surface using single sweeps.
• Do not re-wipe over the area that has been cleaned with the dirty cloth.
  

Porous Surface Sealing

• Porous surfaces must be sealed prior to application to prevent water from attacking the adhesive.
• We supply a specific Primer for this job which can be added to your shopping cart during checkout.
• Apply a thin coat to the thoroughly cleaned surface using a paintbrush, then leave to dry.
• In normal conditions, drying should take less than 30 minutes.
  

Tape Application

• Cut tape to the required dimensions.
• Peel back part of the release liner then press the adhesive firmly onto the prepared surface, and slowly keep peeling back the liner while applying the tape.
• Try to ensure that the tape is not taut.
• Our Conformable Anti Slip Tape is designed for Chequer Plate and other profiled or uneven surfaces and can be gently firmed into position using a rubber mallet to help the tape fit into the contours of the surface.
  

Finish!

• Once applied, press tape down firmly using even pressure (decorating rollers are excellent for this).
• We recommend sealing the edges using ‘edge fix’ as this will extend the life of the product.
• Only apply a very small bead down the edges after the tape has been applied.
• If correctly applied, the new anti-slip surface can be walked on straight away, though you will get the maximum benefit from the adhesive system after 48 hours.

BENEFITS OF OUR ANTI-SLIP CIRCLES

• 50mm Pre Cut Circles
• Immediately reduces the risk of slip accidents
• Self-Adhesive Making It Easy & Quick To Apply
• Can be used indoors and outdoors
• Used for standard applications inc stairs etc
• Cost-Effective Anti-Slip Solution
• Easily Cut To Size With Either Scissors Or A Knife
• Excellent Quality Being Manufactured In The UK
• Quality Guaranteed
• Helps You Meet DDA Regulations & Duty Of Care
• Durable Anti Slip Product